Product Description: Harken Radial 2 Speed Alum Self-Tailing Winch (46.2STA)

Features:

• Weight reductions between 25 and 50 percent, allowing smaller winches to carry higher loads
• Shaped gripping surfaces for reduced line wear
• Stress-free seasonal maintenance
• One-person installation with easy upgrades to power.
• The drum’s gripping surface is shaped for each winch size and drum material, and features diagonal ribs (rather than textured materials) to maximize gripping power and greatly reduce line wear.
• When easing, other winches tend to push the line wraps up.
  • The Radial grip works more like a screw, driving the wraps down when easing to keep them on the part of the drum where you have the best control.
• The strong, one-piece stripper arm completely covers the winch top.
• The top does not rotate, preventing fingers and clothing from catching in moving parts which is an important safety feature, particularly when operating powered winches.
• The arm can be adjusted to multiple positions after the winch is mounted and is shaped to smoothly feed line into and out of the self-tailing jaws.
• Under line pressure, the spring-loaded upper jaw adjusts to accept a variety of line sizes.
• Strong, lightweight composite roller bearings and bushing (in sized 20 winches) have excellent corrosion resistance and don’t require lubrication.
• The snap-fit design keeps bearings captive in a high-strength, Delrin® cage when the drum is removed for maintenance.
• Load-carrying gears and pins are 17-4PH stainless steel.
• Harken’s patent-pending stud-bolt mounting system allows one person to quickly install a winch through predrilled holes on deck—without removing the drum. Seasonal maintenance is also exceptionally easy.
• The drum lifts out as a single unit and the roller bearings remain captive, making reassembly quick and mistake-free, making bearings lost overboard a thing of the past.
• Part of the design goal for Radial winches was that they easily convert to power, with upgrades an integral part of the design, rather than added as an afterthought.
• There is no need for an adapter plate and the identical stud pattern means no filling old holes and drilling new ones.
• Boat builders can make upgrades even easier by precutting and sealing a 3.00 in (7.6 cm) drive-shaft hole into the boat.

Specifications:

• Gear Ratio (1): 2.30 : 1
• Gear Ratio (2): 9.17 : 1
• Power Ratio (1): 11.70 : 1
• Power Ratio (2): 46.50 : 1
• Fastener Circle: 5-7/8"
• Fasteners (FH): 5 x 5/16"
• Drum Diameter- 3-7/8"
• Base Diameter: 7-1/4"
• Height: 7-15/16"
• Weight (lb): 11.5
• Line Entry Height (LE) (in): 3-9/16"