2100 Jib Furling System

Schaefer Jib Furlers

Schaefer Roller Furling/Reefing allows you to set, furl and reef your genoa from the safety and convenience of the cockpit. You no longer need to scramble forward to hank on your luff or "tame the beast" of a flailing genoa dropped on the foredeck. Best of all, it's a one person job to handle even your big 150% genoa.

All Schaefer Systems are designed to be the strongest, best performing furling systems you can install on your boat. Combined with one "wide range" reefing sail, Schaefer Roller Furling/Reefing Systems can do the work of three or four conventional sails. Sailmakers can modify your existing sail or build a single sail that can perform well in winds from 0 to 35 knots.

Our primary goal was to provide our customers with a product that meets their expectations of Schaefer's high quality.

Bearing Liners
Polyethylene headstay bearings prevent corrosion and promote smooth furling.

"Angular Contact" Races
Handle both thrust and axial stresses by distributing sail and halyard loads to maximum bearing surface.

Aluminum Top Cap
Prevents the halyard swivel from being accidentally over-hoisted.

Sta-Lok ™ Wire Fitting
Allows conversion of your existing headstay without special tools.

Twin Aft Facing Sail Grooves
Two aft facing sail grooves allow furling system to carry two sails at once and quick sail changes during racing.

Investment Cast Stainless Feeder
Stainless sail feeder provides smooth sail entry without chafe. Captive fasteners insure "no splash".

Riveted Assembly
Reliable riveted assembly requires no drilling, glue, or Loctite ™. Rivets cannot freeze, strip or back out. Foil can be easily removed and repaired.

Torlon™ Ball Bearings
Triple race Amoco Torlon™ ball bearings offer high compressive strength and require no lubrication.

Precision Drilled Torque Links
Computerized milling machinery allows perfect alignment of fasteners.

Open Drum Design
Allows for easy furling line inspection and maintenance.

Investment Cast Stainless Drum Cage
Prevents damage to the drum from anchors.

Full Headstay Adjustment
Use of existing headstay and turnbuckle reduces expense and installation time and allows full adjustment.

Captive Fasteners
Fasteners are captive and set in heli-coils to prevent seizing.

Removable Split Drum
System 1100, 2100, 3100, and 4100 allow easy conversion for racing.

Large Diameter Drum
Provides greater mechanical advantage and additional control line capacity

Heavy-Duty Base Toggle / Link
Over-built to handle excessive side loads.

Schaefer 210001 - Jib Furling System 2100 w/ Sta-Lok for 1/4 in wire 1/2 in. pin (10mm)

CODE: SCH210001

System 2100, 1/4" Wire, 1/2" Pin (6/13mm)

Schaefer 210002 - Jib Furling System 2100 w/ Sta-Lok for 9/32 in wire 1/2 in. pin (11mm)

CODE: SCH210002

System 2100, 9/32" Wire, 1/2" Pin (7/13mm)

Schaefer 210019 - Clamp on block / line kit 70ft. 5/16 in. (21m / 8mm)

CODE: SCH210019

Clamp-On Block/Line Kit, 70', 5/16"(21m/8mm)

Schaefer 210020 - Clear Step block / line kit 70 ft. 5/16 in. (21m / 8mm)

CODE: SCH210020

Clear Step Block/Line Kit, 70', 5/16"(21m/8mm)

Schaefer 210044 - Jib Furling System 2100 1/2 in. (13mm) pin

CODE: SCH210044

System 2100, No Sta-Lok, 1/2"(13mm) Pin

Schaefer 210055 - Jib Furling System 2100 5/8 in. (16mm) pin

CODE: SCH210055

System 2100, No Sta-Lok, 5/8"(16mm) Pin

Schaefer 46018 - 2100 Integral Toggle / Link 5/8 in. pin

CODE: SCH46018


2100 Integral Toggle/Link, 5/8" Pin

Schaefer 46026 - 2100 Integral Toggle / Link 3/8 in. pin

CODE: SCH46026

2100 Integral Toggle/Link, 3/8" Pin